The Bionx PL 250's
250 watt electric hub motor is activated by pedaling or throttle with four
assistance levels. This allows you to change the amount
of help the Bionx motor gives you and ride efficiently on the
hills or the flats.
Bionx's 250 watt motor is super efficient, directly amplifying your pedal strokes to propel your bike uphill with throttle or proportional assistance. Ideal for commuting or recreational riding, the Bionx PL250 converts your existing bike into an electric power machine.
Bionx system can be installed on a tandem, folding
bike or recumbent; any bicycle with an external shifting
installation is easy with a threaded freewheel. A thumb throttle is included on all kits from Electric Cyclery.
Get back what you put in.
Produce your own energy with the Bionx regenerative motor. By activating the brake lever or using the Generation levels, the motor will automatically transform your speed into energy and store it back into the battery. Ride, regenerate and use the stored power to extend your ride.
This Motor will live forever.
The Bionx system is powered by a zero-maintenance 250 watt motor with pedal assist and thumb
throttle. It is equipped with magnetic field drive
technology and there is no friction inside the motor,
thus no wear.
- Power: 250 W nominal and 450 W peak.
Nominal torque: 7 N.m
Maximum torque: 25 N.m
Battery type: 26 V, 9.6 AH - Total Weight: 15.4 lb
So much Battery Power - so little weight.
Ride long distances with no worries knowing that you’ll have the power you need, whenever you need it. The Bionx Lithium Maganese rechargeable battery is safe, stable, light, and extremely compact. A single charge of the battery can last up to 46 miles or more when using the regeneration mode. The BionX system includes a charger that will recharge your battery in less than three hours. The battery itself is easily installed using water bottle mounts or a rear rack. It locks into place with a unique key and can be removed within seconds for charging on or off the bike.
Console and Throttle Mounted near the center of your bicycle's handlebars, the Bionx Command Console
is equipped with a microprocessor that provides
both assistance and generation modes.
include back lighting, speedometer, multifunction odometer, battery gauge, stress meter, and diagnostic modes. For security, the Command Console
is easily removed to take with you when parking your bike.
The G2 Thumb Throttle The new G2 independent throttle allows you to install the thumb throttle close to the handlebar grips for easy thumb access and mount the Command Console closer to the visual center of your handlebars. Adjust your assistance and generation levels with the plus and minus buttons or just hit the red button and off you go. We love that little red button.
The G2 Thumb
Throttle option is included with all Bionx kits sold by Electric
Bionx Installation Video
With these step by step instructions, its not that hard to install a Bionx kit on your own bike.
With a few tools and a couple hours work, your bike is transformed with the most reliable electric bicycle kit worldwide.
The Bionx system can be installed on all standard wheel sizes, with the standard 135mm drop-out. Disc brakes are also
compatible with the Bionx motorized wheel.
Please note that this video shows an earlier version of the Bionx console. All Bionx kits shipped from Electric Cyclery include the new G2 consoles with independent throttle.
FREE INSTALLATION FOR ALL
BIONX CONVERSION KITS
Bring your bike down to our Laguna Beach service center and we'll install, tune and test your Bionx kit free of charge with every purchase.
Electric Cyclery has most models and wheel sizes in stock but its not a bad idea to call ahead to check availability. Come down to Laguna Beach and Electric Cyclery will expertly install a Bionx kit on your bike in just a couple of hours while you grab a bite or go hang out at the beach.
Call 949 715 2345 or stop by for a test ride.
900 North Coast Highway, Laguna Beach, California 92651 Directions and hours