Manufactured
in Canada, the Bionx (pronounced by-on-ex)
electric bike motor conversion kits are reputable, reliable, lightweight
and offer a range of up to 60 miles to a charge.
Electric Cyclery offers pre-built Bionx bikes as well as Bionx conversion kits that include everything you need to convert your own bicycle into a high powered electric bike.
Proportional "Real-time" Assistance
The patented Bionx pedal-amplification system measures your pedal strokes using a stress sensor built into the rear axle. The Bionx motor takes that information and amplifies it seamlessly from 25 to 200 percent depending on your assistance settings. Keep in mind that proportional assistance means if you back off on your pedaling, the motor does the same. If you decide to charge ahead and pump the pedals, you better hold on tight because the Bionx system will amplify your pedal strokes instantly.
Or just give it some Throttle
If you don't feel like peddling at all, just hit the thumb throttle for speeds up to 20 mph on the flat. This is loads of fun but keep in mind that using the throttle drains the battery faster and greatly reduces your range. As a rule, the less assistance you use, the longer your range per charge. Having said that, if you're only going out for a short trip of a few miles, you're gonna love that sweet little red button.
Regenerative
Anti-Lock Braking
In addition to four generative modes,
regenerative braking also activates when the rear hand brake
is engaged. When in use, Generation Mode recharges the
battery but also makes it harder to pedal. The generative mode
does not replace the existing brakes, but considerably increases braking quality on the rear wheel especially on downhill
runs. A note to off-road riders: Descending steep, loose terrain in Generation Mode Level Four provides a safe and controlled downhill ride that will make you grin and chill. No more pumping the brakes for fear of locking up and there's the added plus that you're turning gravity into electricity and extending your ride. Gotta love that!
Command
Console and Throttle
Mounted near the center of your bicycle's handlebars, the Bionx Command Console
is equipped with a microprocessor that provides
both assistance and generation modes.
Other features
include back lighting, speedometer, multifunction odometer, battery gauge, stress meter, and diagnostic modes. For security, the Command Console
is easily removed to take with you when parking your bike.
The G2 Thumb Throttle
The new G2 independent throttle allows you to install the thumb throttle close to the handlebar grips for easy thumb access and mount the Command Console closer to the visual center of your handlebars. Adjust your assistance and generation levels with the plus and minus buttons or just hit the red button and off you go. We love that little red button.
The G2 Thumb
Throttle option is included with all Bionx kits sold by Electric
Cyclery.
The Bionx Complete Electric Bicycle Conversion Kit
- The
Bionx kit includes: a spoked wheel with motor, console,
battery mount with cables, battery pack and charger.
- Wheel
sizes: 29"/700c, 26", 24", 20", all with a standard
135 mm rear wheel drop-out.
- Gearing
installation is easy with threaded multi-gear freewheels.
- The
Bionx system can be installed on a tandem, folding bike
or recumbent; any bicycle with a standard shifting system.
- The
Bionx control console is mounted anywhere on the handlebars with an independent thumb throttle for instant acceleration.
- The
Bionx motor wheel is fully compatible with disc style brakes or rim brakes. All sizes are standard.
- Easy installation is fast with detailed instructions and all necessary hardware is included. If you have a question, please give us a call.
Optional Integrated Rear Battery Rack available Having trouble fitting your battery on the water bottle mounts? The Bionx rear rack battery is the perfect solution. Installing the Bionx battery under the rack is a good option when your bike frame does not allow for a low and center battery installation. This innovative design also includes an integrated tail light system for improved safety and visibility while leaving the top and sides of the rack available for cargo.
Available for the PL350 and PL500 Bionx motor kits for an additional $100. The rear rack option also includes a 6 / 12 volt accessory plug.
The
Bionx systems require a thread-on freewheel for rear
wheel gearing. If you are unsure as to what
size freewheel is needed, simply count the number
of sprockets on the rear wheel. Electric Cyclerycustomers
have the option of ordering a 5, 6, 7, 8, or 9 speed
freewheel with any of the Bionx conversion kits on
checkout.
Bionx Installation Video
With these step by step instructions, its not that hard to install a Bionx kit on your own bike.
With a few tools and a couple hours work, your bike is transformed with the most reliable electric bicycle kit worldwide.
The Bionx system can be installed on all standard wheel sizes, with the standard 135mm drop-out. Disc brakes are also
compatible with the Bionx motorized wheel.
Please note that this video shows an earlier version of the Bionx console. All Bionx kits shipped from Electric Cyclery include the new G2 consoles with independent throttle.
Test
ride the Bionx system at Electric Cyclery in Laguna Beach,
California.
Electric Cyclery and its domain, greenspeed.us have no relation to or connection with greenspeed.us.com which contains material that in no way represents Electric Cyclery, its published product specifications, online pricing or warranty claims.
Electric Cyclery sincerely apologizes to our customers for any confusion
with product information and fullfillment of orders placed with www.greenspeed.us.com.
Optional Integrated Rear Battery Rack available 
